P2C94 — Hybrid/EV Battery Contactor Control Supply Circuit/Low
The supply circuit for the hybrid battery contactor control reports a low condition. Contactor coils may not energise as expected.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Hybrid battery contactor control supply
- Wiring harness
- Bms
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Supply wire shorted to ground
- Supply rail collapses under load
- Pack cell imbalance approaching service threshold
Possible symptoms
- EV/hybrid system warning light on
- Reduced power output or limp mode
- Charging may fail or be slowed
- Reduced electric range
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.