P2B8E — Intake Air O2 Sensor Heater Control Circuit High Bank 1
Voltage on the intake air O2 sensor heater control line on bank 1 is above the expected window. Wire shorted to B+ or heater element open.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Intake air o2 sensor b1
- Intake air o2 sensor heater b1
- Wiring harness
- Ecm
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Heater wire shorted to B+
- Open heater element
- Connector pins corroded - high contact resistance
Possible symptoms
- Check engine light on after several drive cycles
- Slightly increased fuel consumption during cold start
- Delayed entry into closed-loop fuel control
- Failed emissions inspection (lambda readiness)
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.