P2B2A — Hybrid/EV Electronics Coolant Pump A Overspeed - Dry Run
The hybrid control module detects that the power electronics coolant pump A is running above the calibrated maximum speed without load. Indicates dry running due to coolant loss or air ingestion.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Hybrid electronics coolant pump a
- Power electronics coolant loop
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Coolant loss in electronics loop
- Air drawn into pump suction
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.