P288D — Shift Fork B Calibration Not Learned
The TCM has not learned the end-stop calibration for shift fork B. Engagement positions cannot be commanded with full precision until adaptation completes.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Shift fork b
- Shift fork actuator b
- Tcm
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Adaptation lost after battery disconnect or TCM reset
- Shift fork replaced without learn procedure
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
- A drive cycle may be required after repair
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.