P2758 — Torque Converter Clutch Pressure Control Solenoid Control Circuit Stuck On
The TCC pressure control solenoid stays in the activated state when commanded off. TCC stays locked which can stall the engine on low-speed stops.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Tcc pressure solenoid
- Torque converter
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Solenoid spool stuck in open position
- TCM output driver stuck on
- Carbon or debris buildup preventing free movement
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
- A drive cycle may be required after repair
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.