P2322 — Ignition Coil H Primary Control Circuit High
The primary control circuit of ignition coil H reads a voltage above the expected level — typically an open primary circuit or a short to battery voltage on the primary control wire. The ECU sees no normal current flow, coil H does not fire, and the cylinder misfires. Causes: an open or disconnected primary wire, an internal open in the coil, or a faulty ECU driver.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Ignition coil h
- Ignition coil wiring h
- Ignition module
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Open circuit in primary winding or harness for coil H
- Connector pins corroded - high contact resistance
- Supply wire pinched against B+ source
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.