P22CA — Turbocharger Compressor Outlet Switching Valve Control Circuit/Open
The drive circuit for the turbocharger compressor outlet switching valve is open. On twin-turbo or sequential boost setups, this valve routes the compressor outlet between low-pressure and high-pressure stages.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Turbocharger
- Boost switching valve
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Solenoid winding open
- Pin pushed back out of connector body
- Cracked solder joint inside the module or sensor
Possible symptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.