P22B5 — O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 2)
The pumping current trim line on bank 1 sensor 2 is open. The trim is the per-sensor calibration code that adjusts pumping current to compensate for production tolerances.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Oxygen sensor
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Open trim line
- Pin pushed back out of connector body
- Cracked solder joint inside the module or sensor
Possible symptoms
- Check engine light on
- Increased fuel consumption
- Possible rough idle or hesitation
- Failed emissions test
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.