P2287 — Injector Control Pressure Sensor Intermittent
The injector control pressure sensor signal is intermittently lost or out of range. Often caused by intermittent wiring faults or a failing sensor that drops out under vibration or temperature.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Icp sensor
- Icp wiring
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Intermittent connector contact
- Sensor failing under load
- Harness routed against vibrating component
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.