P2262 — Turbo Boost Pressure Not Detected - Mechanical
The ECU does not detect any meaningful boost pressure increase under load even though the turbocharger is commanded. Likely a mechanical defect in the turbo, charge-air piping or wastegate.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Turbocharger
- Charge air pipe
- Wastegate actuator
- Boost pressure sensor
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Charge pipe loose or split
- Turbocharger mechanical damage
- Wastegate stuck open
Possible symptoms
- Check engine light on
- Significant power loss / limp mode
- Possible blue or black smoke from exhaust
- Whistling or hissing sound from intake
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
- Reduced-power or limp mode may occur
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.