P2219 — NOx Sensor Heater Control Circuit Low (Bank 2)
NOx Sensor Heater Control Circuit Low (Bank 2): the control-circuit voltage is below the expected range. The NOx sensor heater brings the sensor to operating temperature; a fault delays accurate NOx readings used for SCR control.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Nox sensor
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Short to ground
- Connector pins corroded - high contact resistance
- Harness chafing through insulation
Possible symptoms
- Check engine light or NOx warning on
- AdBlue/DEF level or quality warning
- Possible no-start countdown after ignore period
- Failed emissions inspection (NOx)
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.