P2189 — System Too Lean at Idle (Bank 2)
Fuel trim on bank 2 hits the lean limit only at idle, while trim returns to normal at higher load. This pattern strongly indicates a vacuum leak — leaks become a larger fraction of total airflow at idle and so dominate the trim, but disappear into background noise above idle.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Intake manifold
- Pcv valve
- Vacuum hose
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Vacuum leak on bank 2
- PCV valve stuck open
Possible symptoms
- Check engine light on
- Rough idle, possible stalling
- Hesitation or hard cold start
- Power loss under load
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.