P2092 — A Camshaft Position Actuator Control Circuit Low (Bank 2)
The intake (A) camshaft phaser solenoid drive line on bank 2 is stuck low — short to ground or stuck-low driver. Variable-valve timing on intake bank 2 cannot be modulated.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Camshaft position actuator
- Vvt solenoid
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Short to ground in solenoid drive line
- Solenoid winding shorted internally
- Connector pins corroded - high contact resistance
Possible symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.