P0A11 — DC/DC Converter Enable Circuit/Open
The DC/DC converter enable circuit reports a enable circuit/open condition. Converter cannot be commanded to start reliably.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Dcdc converter enable circuit
- Wiring harness
- Hybrid control module
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Open in enable wire
- Enable switch failed
- Pin pushed back out of connector body
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.