P0825 — Gear Lever Push-Pull Switch (Shift Anticipate)
General electrical fault on the gear-lever push-pull switch — a low-force capacitive or microswitch sensor in the lever knob that detects the operator gripping the lever before it actually moves. Used for shift-anticipation, where the TCM can pre-charge a friction element so the upcoming shift feels seamless.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Push pull switch
- Gear lever
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Open or shorted wiring
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.