P080B — Upshift/Skip Shift Solenoid Control Circuit Range/Performance
Skip-shift solenoid is electrically intact, but the lockout effect does not match commands — solenoid sticks or coil aged, gearbox interlock cannot be applied or released within the expected time.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Skip shift solenoid
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Aged solenoid with weakened force
- Sensor element aged beyond calibration window
- Sensor mounting loose - signal damping
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.