P06D6 — Sensor Reference Voltage F Circuit Open
The 5-volt sensor reference rail F is open — the module supplies no voltage on this circuit. Every sensor powered from reference F loses its supply and reads invalid, so the ECU substitutes default values and may limit engine operation. Causes: a broken reference wire, a disconnected connector, or an internal open in the module's voltage regulator for rail F.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Sensor reference voltage f
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Open in shared reference rail
- Pin pushed back out of connector body
- Cracked solder joint inside the module or sensor
Possible symptoms
- Check engine light on
- Possible limp mode or no-start
- Multiple follow-up faults across modules
- Reset/relearn may be needed after repair
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.