P02CD — Cylinder 1 Fuel Injector A Offset Learning At Max Limit
The per-cylinder injector offset on cylinder 1 has reached its maximum value — the injector is delivering significantly less fuel than the calibrated reference, and the controller cannot trim it any further.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Fuel injector
- Powertrain control module
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Injector under-delivering — clogged nozzle or worn coil
- Calibration code not programmed after replacement
Possible symptoms
- Check engine light on
- Misfire or rough idle on the affected cylinder
- Increased fuel consumption
- Possible fuel smell or smoke from exhaust
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.