P0124 — Throttle/Pedal Position Sensor "A" Circuit Intermittent
The TPS signal shows intermittent dropouts that do not stay outside threshold long enough to trigger P0122/P0123. Drive-by-wire systems are sensitive to this and may briefly enter limp-home mode each time.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Throttle position sensor
- Throttle position sensor wiring
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Loose or oxidised connector
- Sensor track worn at one spot (older potentiometer-type)
- Connector with intermittent contact under vibration
Possible symptoms
- Check engine light on
- Reduced throttle response, possible limp mode
- Hesitation or surging
- Idle too high or too low
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.