P0108 — Manifold Absolute Pressure Sensor High Input
The MAP sensor reports a pressure above the upper threshold the ECU expects in any engine state. Typically caused by a short in the signal circuit or a sensor that has failed producing a fixed high output.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Map sensor
- Map sensor wiring
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Signal wire shorted to supply voltage
- MAP sensor failed
- Sensor ground broken
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.