P0088 — Fuel Rail/System Pressure Too High
The ECU detects fuel rail pressure above the desired setpoint and cannot reduce it through pressure regulator commands. Risk of injector damage and rail seal failure if not addressed.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Fuel pressure regulator
- High pressure fuel pump
- Fuel rail pressure sensor
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Pressure regulator stuck closed
- Rail pressure sensor drift
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
- Reduced-power or limp mode may occur
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.