P003C — A Camshaft Profile Actuator A Control Performance/Stuck Off Bank 1
The intake cam profile actuator (profile A, bank 1) does not engage when commanded — stays in low-lift profile. Often hydraulic pin sticking or low oil pressure.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Cam profile actuator
- Oil control valve
- Engine oil
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Oil control valve stuck
- Low oil pressure
- Carbon or debris buildup preventing free movement
Possible symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.