P0010 — "A" Camshaft Position Actuator Circuit (Bank 1)
An electrical fault in the bank 1 intake camshaft position actuator solenoid (variable valve timing). The ECU monitors current and feedback on the oil control valve and sets this code when the circuit is open, shorted, or out of range.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Camshaft position actuator
- Oil control valve
- Actuator wiring
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Oil control valve electrically failed
- Wiring or connector fault to actuator
Possible symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.