P0008 — Engine Position System Performance Bank 1
The ECU detects an implausible relationship between crankshaft and camshaft signals on bank 1, indicating timing chain stretch, jumped tooth, or sensor reluctor wear.
General code reference. Confirm the definition and diagnostic procedure for your vehicle's year, model and engine. A stored code alone does not identify a failed part.
Affected components
- Timing chain
- Crankshaft position sensor
- Camshaft position sensor
- Reluctor ring
Possible causes to check
These are possible checks, not a ranked diagnosis. Follow the vehicle manufacturer's test procedure before replacing parts.
- Timing chain stretched, guides worn
- Chain jumped one tooth
- Crankshaft or camshaft sensor misaligned
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
- Reduced-power or limp mode may occur
Related codes
Sources
Check each reference's vehicle and model-year scope. General background links do not establish which fault is most likely on your vehicle.
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.